Description
Details
* Dimension of each sticker: 30mm x 13mm.
* Sticker Count options: 18 pieces or 33 pieces.
* Text Color: Black.
* Background: Princess.
* Font size will be reduced to fit in longer details.
* It is advisable to keep the details short to enhance readability.
* If the instructions below are followed, our labels can withstand in excess of 60 washes, and dryer safe up to 30 cycles.
* Quick guide video at our youtube channel here.
Things to note before start:
1. The glue of the label needs approximately 150-170 C for few seconds to initiate glue bonding with any fabric.
2. Dry Iron is preferred. Steam from iron can weaken the glue bonding between label and fabric.
3. Iron the label using base plate areas without holes. Steam iron base plate usually has holes which can cause uneven glue bonding.
4. Tip of the iron is good to get corners. But sometimes not as hot as the centre part of the iron plate, so you may have to iron longer.
5. Please avoid peeling the label from corner to ensure proper glue bonding upon ironing. Peel from any sides
6. Soiled/Wet garments will not allow proper glue bonding.
7. For delicate garments, cover the label with thin cloth prior to iron.
8. We highly recommend to wait 24 hours prior washing to ensure complete bonding of labels to fabric.
Iron On Label Step-by-Step Guide:
1. Turn off Steam function and set to ‘Dry Mode’.
2. Preheat iron to ‘Linen/Cotton/3 stars or circles’ setting.
3. Turn garment inside-out, if needed.
4. Carefully peel off label from one of the sides.
5. Apply the label on a dry and clean garment.
6. Press iron firmly on the label for 15 seconds without moving the iron around. Then, remove the iron from label to let it rest for 15 seconds. (15sec ON, 15sec OFF)
7. Repeat Step 6 twice.
8. When pressed area has cooled, check the label bonding. Even if you can peel a little off from side, it means bonding is not fully secured. Please repeat Step 6 with more pressure on the iron for approximately 15-20seconds.
